ELECTRIC KILNS PROFESSIONAL

KILN WITH PROFESSIONAL CART ESTRAIBILE

  • Removable rack kiln
  • cooling dampers with automatic opening
  • Paneling in stainless steel
  • Control of the temperature of two points with regulation automatica

MAXIMUM TEMPERATURE 1100 ° C

MODEL

INTERNAL MEASURES

LXPXH

EXTERNAL MEASURES

LXPXH

POWER CONSUMPTION

KW

WEIGHT KG
 PRTC   250  60 X 60X 70 120 X 150 X 170  10  800
 PRTC   330 65 X 65 X 80 125 X 155 X 180 12 950
PRTC  500  70 X 80 X 90 130 X 170 X 190  16  1250
 PRTC    750  80 X 90 X 105 140 X 180 X 200  22  1500
PRTC  1000 80 X 120 X 105 140 X 210 X 200  28  1800

KILN WITH PROFESSIONAL FIXED SOLE

  • Kiln fixed sole
  • cooling dampers with automatic opening
  • Paneling in stainless steel
  • Control of the temperature of two points with regulation automatica

MAXIMUM TEMPERATURE 1100 ° C

MODEL

INTERNAL MEASURES

LXPXH

EXTERNAL MEASURES

LXPXH

POWER CONSUMPTION

KW

WEIGHT KG
 PRT   250  60 X 60X 70 120 X 150 X 170  10  800
 PRT   330 65 X 65 X 80 125 X 155 X 180 12 950
PRT  500  70 X 80 X 90 130 X 170 X 190  16  1250
 PRT    750  80 X 90 X 105 140 X 180 X 200  22  1500
  PRT   1000 80 X 120 X 105 140 X 210 X 200  28  1800

ATR 621 Programmable controller 15 cycle / 45 step

Programmer 72x72mm, single control loop. Allows the programming of 15 cycles/programs that can provide up to 45 steps/segments, all of which can be configured by the user as raise/maintain/lower. Programming mode of the work cycle that is intuitive and simple to use even for inexpert operators. Step end wait software functions (in case of a delay of the process on the programmed setpoint value) and Cycle Recovery mode (after a power cut-off) are the main features of this programmer that has been specifically designed for the automation of industrial kilns, climatic chambers, dryers and the management of thermal processes in general that require the programming of cycles/curves with control of the process variable in relation to time. Universal input and outputs that can be set as control, alarm/auxiliary and serial port RS485. All options can be configured from the keypad. MEMORY-CARD auxiliary support for the installer for quick configuration.

Graphic terminal / Process controller 20 cycles/30 step

LCD 251x146mm, Multi-loop graphic terminal Integrated by a variable number of Pixsys PL300 Acquisition/Actuation Modules, it constitutes a complete and flexible control system for managing thermal processes in industrial kilns, dryers and environmental control chambers. Up to 5 PL300 modules allow control of up to 20 processes, which can be linked to 2 setpoints that can be configured for temperature/pressure/humidity/oxygen percentage levels. Specific software features for gas ovens are also available, including motorised valve management. Double hot/cold PID mode to control environmental control chambers. Wait (system inertia compensation) and Cycle Recovery (following a power cut off) functions. Analogue retransmission of process/setpoint values. Graphic display of cycle trends and internal recorder to monitor up to 6 traces. Events list with date/time. Serial communication RS485/RS232/RS422, MODBUS protocol Optional software app DataLogger313 to display cycle trends or for the download/upload of parameters and cycle data on/from Terminal and firmware updates (possible also by Memory Card) on a PC.