TURBO GAS KILNS

TURBO GAS KILN COVERED WITH TAVELLE

  • Removable rack oven
  • Interior lining with refractory tavelline
  • Paneling in stainless steel
  • Temperature control with programmer ATR 313
  • Programmer 20 programs 30 step
  • Graphic recording of the firing curve

MAXIMUM TEMPERATURE 1100 ° C

MODEL

 CAPACITY   MC

INTERNAL MEASURES  LXPXH

POWER KCAL

BURNERS
 PRGT 1000 1 800X1200X1100 120.000 4
 PRGT 1500 1.5 1000X1500X1000 180.000 6
PRGT 2000 2 1000X2000X1000  180.000 6
 PRGT 3000 3 1200X2500X1000  240.000 8
PRGT 4000 4 1300X2750X1150 300.000 10
 PRGT 5000 5 1300X3000X1300  360.000  12
 PRGT 6000 6 1500X3000X1350  420.000  14

TURBO GAS KILN LINING IN FIBER

  • Removable rack oven
  • Inner lining with ceramic wool Cup Lok System
  • Paneling in stainless steel
  • Temperature control with programmer ATR 313
  • Programmer 20 programs 30 step
  • Graphic recording of the firing curve
MAXIMUM TEMPERATURE 1100 ° C

MODEL

 CAPACITY MC

 INTERNAL MEASURES LXPXH

          POWER  KCAL BURNER
 PRGF 1000 1 800X1200X1100 120.000 4
 PRGF 1500 1.5 1000X1500X1000 180.000 6
PRGF 2000 2 1000X2000X1000  180.000 6
 PRGF 3000 3 1200X2500X1000  240.000 8
PRGF 4000 4 1300X2750X1150 300.000 10
 PRGF 5000 5 1350X3000X1250  360.000  12
 PRGF 6000 6 1500X3000X1350  400.000  14

TURBO GAS KILN LINING IN FIBER

  • Removable rack oven
  • Interior lining with ceramic fiber system Zeta Blok
  • Paneling in stainless steel
  • Temperature control with programmer ATR 313
  • Programmer 20 programs 30 step
  • Graphic recording of the firing curve

MAXIMUM TEMPERATURE 1300 ° C

MODEL

 CAPACITY MC

INTERNAL MEASURES LXPXH

POWER KCAL

BURNER
 PRGF-H  1000 1 800X1200X1100 120.000 4
 PRGF-H  1500 1.5 1000X1500X1000 180.000 6
PRGF-H  2000 2 1000X2000X1000  240.000 8
 PRGF-H  3000 3 1200X2500X1000  300.000 10
PRGF-H  4000 4 1300X2750X1150 360.000 12
 PRGF-H   5000 5 1350X3000X1250  420.000  14
 PRGF-H   6000 6 1500X3000X1350  480.000  16

Graphic terminal / Process controller 20 cycles/30 step

LCD 251x146mm, Multi-loop graphic terminal Integrated by a variable number of Pixsys PL300 Acquisition/Actuation Modules, it constitutes a complete and flexible control system for managing thermal processes in industrial kilns, dryers and environmental control chambers. Up to 5 PL300 modules allow control of up to 20 processes, which can be linked to 2 setpoints that can be configured for temperature/pressure/humidity/oxygen percentage levels. Specific software features for gas ovens are also available, including motorised valve management. Double hot/cold PID mode to control environmental control chambers. Wait (system inertia compensation) and Cycle Recovery (following a power cut off) functions. Analogue retransmission of process/setpoint values. Graphic display of cycle trends and internal recorder to monitor up to 6 traces. Events list with date/time. Serial communication RS485/RS232/RS422, MODBUS protocol Optional software app DataLogger313 to display cycle trends or for the download/upload of parameters and cycle data on/from Terminal and firmware updates (possible also by Memory Card) on a PC.